Remote Controllable , Microwave Motion Sensor Switch , 12V DC Input , Enhanced Dection Range

Specially designed for highbay fixtures(warehouse lamp / canopy / shoebox / gas station lamp / stadium lamp, etc), built-in use, Reinforced detection range up to 12~15m high, infrared remote to change all the settings, with daylight monitoring function.

Features--

5.8GHz C-band microwave.

Input voltage 12V DC (5V & 24V DC version available on request).

Input current:≧25mA.

1~10V dimming signal. (5V DC high-low voltage & PWM output version available on request)

Dual-processor technology, real Lux -Off & Daylight monitoring function for built-in application.

IR remote commissioning, easy setting and user friendly.

Detection range up to 18m in diameter.

Mounting height: Max. 15m.

Operation temperature: -20℃ ~ +70 ℃

Settings(by remote control IR12)--

Permanent ON/OFF function

Press ^“ON/OFF^” button, fixture goes to permanent on or permanent off mode, sensor is disabled.

*press "Auto” ,”Reset" or “Ambient learn” to quit this mode.

Dim +/-

Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.

*after desired brightness is locked down, if user wants to dim again reversely, just press the ^“Dim^” button again and then lock down the new brightness again.

Sensor mode

Press ^“Auto^” button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.

Reset function

Press^”Reset^” button, all settings go back to factory default settings.

*Factory default settings--

Sensitivity=100%

Daylight sensor=disable

Hold time=90s

Twilight time=5min

Twilight level=10%

Ambient learn

Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.

Test mode

"Test mode"is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.

Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.

*Test mode defaulted settings—

Daylight sensor=disable

Hold time=3s

Twilight time=N/A

Twilight level=N/A

In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).

Detection pattern--

Daylight monitoring function--

Utilizing the Dual-processor technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required (ambient light is bright enough).

This is the REAL& INTELLIGENT daylight monitoring sensor for built-in installation.

Note: Lux-Off sampling time—30s; Lux-On sampling time—10s.

Lux-On function takes effect only when standby dimming period set at +∞.

HYNALL INTELLIGENT CONTROL CO. LTD.

is a technology & innovation oriented team who persistently strive for all kinds of professional microwave motion sensor controls based on our 20 years+ experiences in industry, we focus ONLY on microwave motion sensing technology, to serve our customers with ultimate solutions that match best and save most!!

Why Hynall?

Although Hynall is 8 years only, we have the most experienced / professional  R&D team + Sales team, thanks to our rich experiences for more than 20 years in microwave motion sensor industry. Our R&D team firstly studied and introduced microwave technology into China for lighting use. From this point of view, we are proud enough to call ourself the industry pioneer, and we still keep that strengths with us till now.

What makes us stand out from others?

a)  Unlike many sensor manufacturers who also get themself involved in driver business or others, we focus only on our expertise--microwave products / solutions, we only do what we are really good at. Every product out of Hynall is microwave related, we seek for product diversity inside microwave industry only!

b)  We have a comprehensive range of all series including antenna modules, digital antennas, AC input versions, DC input versions, VR adjustable versions, remote control versions, detached versions, daylight harvesting version, and so on.

c)  With such professional + well experienced R&D + Sales team, we understand deeply of different lighting fixture types and various sensor applications, enable us to offer customers with best product selection, trouble shooting and after sales service.

d)  We are fast-responding and very flexible for all kinds tailor made products.